Do you know that the tent poles and textiles used in tarps must be carefully chosen to meet specific requirements? Do you believe that all canvas textiles are exactly the same? Green Camping will inform you thoroughly.

Selection of tent poles

1. Steel pipe: high-frequency welded pipe is mostly utilized in primitive campsites, humanitarian aid marquees, and some other huge tarpaulins mentioned. The outside is painted or zinc. There seem to be circular triangular barrels, with determine the required ranging from 19 to 50mm and sidewall thicknesses ranging from 0.8 to 3mm.

2. Elastic just: this is usually a kids' camper or a beach camping tent.

3. Fiberglass rod: 6.9/7.9/8.5/9.5/11/12.5 a series of. The greater the thickness, the greater the stiffness, and the lower the flexibility. That whether the fibers cable bracket choice is suitable is determined by the proportion of its base size and height; too thick and too thin brackets are easily broken. For example 210 * 210 * 130 is the proportion of the more classic size, the tube is generally 7.9 or 8.5.

4. Aluminum alloy skeleton: the composition proportion is also more challenging for higher-grade alloys. Generally speaking, the basic frame global curvature curve is generated first, followed by hot pressing formed treatment. The benefit is that it is long-lasting, lightweight, and portable. Whereas the quality is poor and the basic is prone to bend modification, typical usage is unlikely to result in a break. Obviously, this is the greatest.

Selection of tent fabric

1. Waterproof performance.

Waterproof 300MM is generally used for beach camping tent/shade tents or drought with less rain cotton tents.

Waterproof 800MM-1200MM for conventional simple camping type tent.

Waterproof 1500MM-2000MM for the more mid-range tents, which need to travel for many days.

Waterproof 3000MM above the general professional tent, take the high-temperature resistance / cold resistance and other technical processing.

2.Bottom material: PE is the most often used material, and its quality is determined mostly by its width and skew severity. The higher the class, with Polyester material and a resistant coating of at about 1500MM beyond.

3. Internal fabric: typically, flexible polyamide or permeable silk is used. The density of the material determines its quality. In terms of usability, polyamide silk outperforms silk, Urethane English fabric as a bedrock. PE outperforms in terms of robustness, heat durability, and water resistance.

4. The outer tent fabric's waterproof ability is still measured by how many millimeters of water column per square centimeter it can tolerate. The basic tent weatherproof is greater than 1500mm in deep ocean, preventing light to severe rain. People who achieve 3000-4000mm can avoid continual rainfall. High quality rain blanket, not only with a rainy season factor, but also with a long tubular stress rubber strip in the tent seam link to resist loss of moisture at the border.

5. The coating determines whether it can withstand high winds and significant rain. Generally speaking, PU800 coating is recommended. This coating does not flow below a static water column of 800mm and may withstand light to moderate rain. A 1000-1200 PU coating can withstand moderate to severe rain, and a covering of more than 1500mm may be employed in a range of conditions. Consider the tent ground material, which is typically made of 420D wear-resistant Oxford cotton.